Difficulties engaging gears. Noise when clutch is engaged
Cause:
1. Severe misalignment.
2. Poor bush lubrication (insufficient oil in the bush
Effect:
Damaged spigot bush/bearing
Action:
1. Replace spigot bush
2. Check engine to gearbox dowels - replace if necessary
3. "Sweat" bronze bushes in oil if necessary.
Trouble Shooting
- Clutch Cover
-
Clutch Disc
- Difficult Disengagement(10)
- Loss of Drive(5)
- Noise & Vibration(3)
- Other(2)
- Shudder (judder)(3)
- Slipping(6)
- Clutch Master Cylinder(1)
- Clutch Slave Cylinder(1)
- Clutch Spigot Bearing, bush (pilot bearing)
-
CSC (concentric slave cylinder)
- CSC Leaking(1)
- Loss of Fluid(5)
- Other(1)
- Flywheel
- Thrust Bearing
- Vehicle Diagnostics(6)
